Hunter GSP9600

Wheel Balancers

Features

• Quick-Thread Auto-Clamping
• Automatic Double Dataset Arms
• Foot Pedal Data Entry
• Wheel Centering Check Software
• Split Spoke and Split Weight Modes
• Servo Stop and Servo Push Drive Control

Specifications

• Power Requirements: 230V (-10%/+15%), 20amp, 50/60-Hz, 1-ph, NEMA Receptacle L6-20R
• Air Supply Requirements: 120 +/- 40 psi (8 +/- 2.7 bar)
• Roller Force: up to 1,400 lbs.
• Rim Width: 1.5" to 20"
• Rim Diameter: 10" to 30"
• ALU: 7.5" to 44"
• Maximum Tire Diameter: 44"
• Maximum Tire Width: 20"
• Maximum Tire Weight: 175 lbs.
• Radial & Lateral Runout Accuracy: .002"
• Imbalance Resolution: +/- 0.05 oz. or 1 gm
• Placement Accuracy: 512 positions, +/- .07°
• Balancing Speed: 300 RPM

Wheel Balancers

Models

Call Vehicle Service Equipment for Details

* Model GSP9612DD7 Shown Above

Hunter DSP9100

Wheel Balancers

Features

• ServoDrive Drive System and User-Friendly Control Panel Provides Fastest "Floor-to-Floor" Cycle Time
• Two-Post Inside Dataset Arms
• Split Weight / Split Spoke Modes
• Direct Measure Tape Weight Placement
• Automatic Double Dataset Arms
• ServoStop and ServoPush Drive Control
• Quick-Thread Auto-Clamping
• Wheel Centering Check Feature
• Spindle-Lock Brake Feature

Specifications

• Rim Width: 1.5" to 20"
• Rim Diameter: 10" to 30:
• ALU: 7.5" to 44"
• Maximum Tire Diameter: 44"
• Maximum Tire Width: 20"
• Maximum Tire/Wheel Weight: 175 lbs
• Imbalance Resolution: +/- 1 gram
• Placement Accuracy: 512 positions (+/- 0.7 degrees)
• Balancing Speed: 300 RPM
• Average Cycle Time: Approximately 5 seconds
• Motor: DC Drive System, 230V, 20 amp, 50/60 Hz,1-ph, NEMA Plug # L6-20P

Wheel Balancers

Models

Call Vehicle Service Equipment for Details

* Model DSP9112 Shown Above

Hunter Mounting Adaptors

Part Number	Description
20-1167-1	Basic - Standard Taper Cone Mounting Kit: (4) Cone Set Includes: 192-86-2, 192-87-2, 192-88-2, 192-89-2, Range: 1.69"- 5.18" (not recommended for GSP Road Force Measurement)
20-1626-1	Basic - Low Taper Cone Mounting Kit: (7) Cone Set Includes: 192-51-2, 192-53-2, 192-54-2, 192-55-2, 192-56-2, 192-57-2, Range: 1.69" - 5.18"
20-1910-1	Preferred - Standard Taper Cone & Flange Plate Mounting Kit: (4) Cones, (4) In-Between Cones, LT/HP Wheel Spacer Ring, Adjustable Flange Plate Kit, Accessories and Pin Tray Includes: 20-1626-1, 20-1328-1, 20-1839-1, 20-1879-1, Range: 1.69" - 5.18"
20-1911-1	Preferred - Low Taper Cone & Flange Plate Mounting Kit: (7) Cones, (4) In-Between Cones, LT/HP Wheel Spacer Ring, Adjustable Flange Plate Kit, Accessories and Pin Tray Includes: 20-1626-1, 20-1328-1, 20-1839-1, 20-1879-1, Range: 1.69" - 5.18"
20-1912-1	Preferred - Direct-Fit Collet & Flange Plate Mounting Kit: (16) Direct-Fit Two Sided Collet Set, LT/HP Wheel Spacer Ring, Adjustable Flange Plate Kit, Accessories and Pin Storage Bench Includes: 20-1847-1, 20-1846-1, 46-433-2, Range: 2.10 " - 5.18" (most accurate centering with broadest application coverage)
20-1167-1	Medium Truck Wheel Mounting Kit: (2) Extra Large Truck Cones, (2) Spacer Rings and TruckChuck Wheel & Drum Centering Kit, Includes: 20-1602-1, 20-1207-1, 20-1929-1, Range: 3.13" - 9.13"

Call Vehicle Service Equipment for Details

Corghi EM8070 QL

Wheel Balancers

Features

• Split Weight Program
• Automatic Data Entry
• Hidden Weight Program
• Alu Balancing Programs
• Precision Weight Placement
• Customizing Programs
• Multiple Operator Programs
• Automatic Weight Position Search
• Optimization, Quick and Easy, Minimizes Weight Use
• Easy-to-Use Data Bank Shows Best Cone Selection
• Quick-Lock for Pneumatic Clamping
• Automatic Calibration
• Full Function CRT
• Radial Runout Capability with Optional Accessory

Specifications

• Voltage: 110V 1 ph.
• Tire Diameter: Up to 36"
• Rim WIdth: 1.5" to 20"
• Rim Diameter: 1" to 25"
• Spin Time: 5.5 seconds
• Balance Speed: 60 to 120 RPM
• Shaft Diameter: 38 mm
• Maximum Tire Weight: 150 lbs