Professional Series
Dual End Swager Pipe Bender
Features
- Equipped with an independent clampless swager and segment expander that allows
the operator to set up different jobs for each side simultaneously
- Individual control handles located in the center of the machine allow operation
of both sides comfortably in any position
- Foot-operated controls keeps hands free
- Two separate end finishing units at rear for all necessary flaring and expanding
- Degree plate located up front for easy viewing
- Comes complete with quick release bending and end finishing dies
- Includes high-speed clampless swager and internal expander
- 3-inch bending capacity: (dies optional)
- Compact design
- Energy efficient 5-H.P. motor
- Heavy-duty 4-GPM hydraulic pump
- Filtered hydraulic system
- Solid steel heat-treated tooling
- Limited 2-year warranty
- Updated computer card system available for all necessary bend data for automobiles
and light trucks dating back to 1960
Specifications
- Maximum Bending Radius: 5"
- Minimum Bending Radius: 3-1/2"
- Maximum Tube Capacity: 3" / .095 Wall
- Dies Supplied: 1-1/2", 1-3/4", 1-7/8", 2", 2-1/4", 2-1/2"
- Top Cylinder Working Force: 60,000 lbs.
- Hydraulic Filter: Canister Type
- Dimensions 41" x 64" x 26"
- Motor: 5-H.P., 220 Volt, 1-Phase (3-Phase Optional)
|
Professional Series
Double Ended Swager Pipe Bender
Features
- Equipped with a double-ended cylinder for both the clampless swager
and segment expander
- A single control handle operates the cylinder and is placed towards
the middle for comfortable operation on both sides
- Foot-operated controls keeps hands free
- Two separate end finishing units at rear for all necessary flaring and expanding
- Degree plate located up front for easy viewing
- Comes complete with quick release bending and end finishing dies
- Includes high-speed clampless swager and internal expander
- 3-inch bending capacity: (dies optional)
- Compact design
- Energy efficient 5-H.P. motor
- Heavy-duty 4-GPM hydraulic pump
- Filtered hydraulic system
- Solid steel heat-treated tooling
- Limited 2-year warranty
- Updated computer card system available for all necessary bend data for automobiles
and light trucks dating back to 1960
Specifications
- Maximum Bending Radius: 5"
- Minimum Bending Radius: 3-1/2"
- Maximum Tube Capacity: 3" / .095 Wall
- Dies Supplied: 1-1/2", 1-3/4", 1-7/8", 2", 2-1/4", 2-1/2"
- Top Cylinder Working Force: 60,000 lbs.
- Hydraulic Filter: Canister Type
- Dimensions: 41" x 62" x 30"
- Motor: 5-H.P., 220 Volt, 1-Phase (3-Phase Optional)
|
Premium Series
Dual End Swager Pipe Bender
Features
- Equipped with an independent clampless swager and segment expander that allows
the operator to set up different jobs for each side simultaneously
- Individual control handles located in the center of the machine allow
operation of both sides comfortably in any position
- Foot-operated controls keeps hands free
- Two separate end finishing units at rear for all necessary flaring and expanding
- Degree plate located up front for easy viewing
- Comes complete with quick release bending and end finishing dies
- Includes high-speed clampless swager and internal expander
- 3-inch bending capacity: (dies optional)
- Compact design
- Energy efficient 5-H.P. motor
- Heavy-duty 4-GPM hydraulic pump
- Filtered hydraulic system
- Solid steel heat-treated tooling
- Limited 2-year warranty
- Updated computer card system available for all necessary bend data for automobiles
and light trucks dating back to 1960
Specifications
- Maximum Bending Radius: 5"
- Minimum Bending Radius: 3-1/2"
- Maximum Tube Capacity: 3" / .095 Wall
- Dies Supplied: 1-1/2", 1-3/4", 1-7/8", 2", 2-1/4", 2-1/2"
- Top Cylinder Working Force: 60,000 lbs.
- Hydraulic Filter: Canister Type
- Dimensions: 41" x 64" x 26"
- Motor: 5-H.P., 220 Volt, 1-Phase (3-Phase Optional)
|
Premium Series
Double Ended Swager Pipe Bender
Features
- Equipped with a double-ended cylinder for both the clampless swager
and segment expander
- A single control handle operates the cylinder and is placed towards the middle
for comfortable operation on both sides
- Foot-operated controls keeps hands free
- Two separate end finishing units at rear for all necessary flaring and expanding
- Degree plate located up front for easy viewing
- Comes complete with quick release bending and end finishing dies
- Includes high-speed clampless swager and internal expander
- 3-inch bending capacity: (dies optional)
- Compact design
- Energy efficient 5-H.P. motor
- Heavy-duty 4-GPM hydraulic pump
- Filtered hydraulic system
- Solid steel heat-treated tooling
- Limited 2-year warranty
- Updated computer card system available for all necessary bend data for automobiles
and light trucks dating back to 1960
Specifications
- Maximum Bending Radius: 5"
- Minimum Bending Radius: 3-1/2"
- Maximum Tube Capacity: 3" / .095 Wall
- Dies Supplied: 1-1/2", 1-3/4", 1-7/8", 2", 2-1/4", 2-1/2"
- Top Cylinder Working Force: 60,000 lbs.
- Hydraulic Filter: Canister Type
- Dimensions: 41" x 62" x 30"
- Motor: 5-H.P., 220 Volt, 1-Phase (3-Phase Optional)
|
Bending Tools
- 5" Radius Die: 2-1/2" · 2-1/4" · 2"
- 4" Radius Die: 2-1/4" · 2" · 1-7/8"
- 3-1/2" Radius Die: 2" · 1-3/4" · 1-1/2"
- Back Shoes (2 of each): 2-1/2" · 2-1/4" · 2" · 1-7/8" · 1-3/4" · 1-1/2"
- Half Shoe: 2-1/2" · 2-1/4" · 2" · 1-7/8" · 1-3/4" · 1-1/2"
- Three Quarter Shoe: 2-1/4" · 2"
Swager Tooling
- 2-1/4" Male Ball Expander: 2-1/2"
- 2" Male Ball Expander: 2-1/4"
- 1-3/4" Male Ball Expander: 2"
- Solid Expander Die: 1-7/8" · 1-3/4" · 1-1/2"
- Hinged Adapter Collar: 2-1/2" · 2-1/4" · 2" · 1-7/8" · 1-3/4" · 1-1/2"
- 45° / 90° Flaring Tool: One Tool Fits All
- Doming Die: One Tool Fits All
- Female Ball Flaring Tool: 1-3/4" · 2-1/4"
- Male Ball Tool: 2-1/2"
- Manifold Flange Tool: 2"
Segment Expander Tooling
- Arbor: One Size Fits All Sizes
- Segment Expander: 2-1/2" · 2-1/4" · 2" · 1-3/4" · 1-1/2"
|
|
Note: The features and specifications listed above are provided by the
manufacturer(s) and may change without notice.
Call
Vehicle Service Equipment for Information. |
.gif){kind=logo}