VEHICLE SERVICE EQUIPMENT

Two Post Automotive Lifts

Bend-Pak MX-10AC
Two Post Lift • 10,000 lb. Capacity
Asymmetric, Clear Floor, Narrow Design
FEATURES
  • 10,000 Pound Lifting Capacity
  • Wide Or Narrow Configuration
  • Exclusive "Tru-Metric" Arm Design Provides More Versatile Arm Positioning
  • 30-Degree Rotated Single Piece Columns
  • Single Piece Columns
  • Single Point Safety Release
  • Dual Hydraulic "Direct-Drive" Cylinders
  • Electric/Hydraulic Power System
  • Large, 17" X 17" A36 Steel Base Plate
  • Self-Lubricating Dura-Glide Polyethylene Bearing System
  • Safety Locks In Each Column Spaced Every 3-Inches
  • Automatic Arm Restraints
  • Heavy-Duty Dual 3/8" Equalizer Cables
  • Padded Overhead Safety-Shutoff Bar
  • Truck And Van Adapters Standard
  • ETL Approved
SPECIFICATIONS
  • Lift Style: Asymmetric Clearfloor
  • Lifting Capacity: 10,000 lbs.
  • Lifting Height: 78"
  • Lifting Time: 45 Seconds
  • Overall Height: 145"
  • Overall Width: 132"
  • Width Between Posts: 101"
  • Drive Thru Clearance: 87"
  • Minimum Pad Height: 4-1/2"
  • Motor: 220 VAC / 60 Hz. / 1 Ph.
 Bend-Pak MX-10ACX
Two Post Lift • 10,000 lb. Capacity
Asymmetric, Clear Floor, Wide Design
FEATURES
  • 10,000 Pound Lifting Capacity
  • Wide Or Narrow Configuration
  • Exclusive "Tru-Metric" Arm Design Provides More Versatile Arm Positioning
  • 30-Degree Rotated Single Piece Columns
  • Single Piece Columns
  • Single Point Safety Release
  • Dual Hydraulic "Direct-Drive" Cylinders
  • Electric/Hydraulic Power System
  • Large, 17" X 17" A36 Steel Base Plate
  • Self-Lubricating Dura-Glide Polyethylene Bearing System
  • Safety Locks In Each Column Spaced Every 3-Inches
  • Automatic Arm Restraints
  • Heavy-Duty Dual 3/8" Equalizer Cables
  • Padded Overhead Safety-Shutoff Bar
  • Truck And Van Adapters Standard
  • ETL Approved
SPECIFICATIONS
  • Lift Style: Asymmetric Clearfloor
  • Lifting Capacity: 10,000 lbs.
  • Lifting Height: 78"
  • Lifting Time: 45 Seconds
  • Overall Height: 145"
  • Overall Width: 145"
  • Width Between Posts: 114"
  • Drive Thru Clearance: 100"
  • Minimum Pad Height: 4-1/2"
  • Motor: 220 VAC / 60 Hz. / 1 Ph.
Bend-Pak MX-10C
Two Post Lift • 10,000 lb. Capacity
Clear Floor, Narrow Design
FEATURES
  • 10,000 Pound Lifting Capacity
  • Wide Or Narrow Configuration
  • Single Piece Columns
  • Single Point Safety Release
  • Dual Hydraulic "Direct-Drive" Cylinders
  • Electric/Hydraulic Power System
  • Large, 17" X 17" A36 Steel Base Plate
  • Self-Lubricating Dura-Glide Polyethylene Bearing System
  • Safety Locks In Each Column Spaced Every 3-Inches
  • Automatic Arm Restraints
  • Heavy-Duty Dual 3/8" Equalizer Cables
  • Padded Overhead Safety-Shutoff Bar
  • Truck And Van Adapters Standard
  • ETL Approved
SPECIFICATIONS
  • Lift Style: Clearfloor
  • Lifting Capacity: 10,000 lbs.
  • Lifting Height: 78"
  • Lifting Time: 45 Seconds
  • Overall Height: 145"
  • Overall Width: 132"
  • Width Between Posts: 105"
  • Drive Thru Clearance: 96"
  • Minimum Pad Height: 4-1/2"
  • Motor: 220 VAC / 60 Hz. / 1 Ph.
 Bend-Pak MX-10CX
Two Post Lift • 10,000 lb. Capacity
Clear Floor, Wide Design
FEATURES
  • 10,000 Pound Lifting Capacity
  • Wide Or Narrow Configuration
  • Single Piece Columns
  • Single Point Safety Release
  • Dual Hydraulic "Direct-Drive" Cylinders
  • Electric/Hydraulic Power System
  • Large, 17" X 17" A36 Steel Base Plate
  • Self-Lubricating Dura-Glide Polyethylene Bearing System
  • Safety Locks In Each Column Spaced Every 3-Inches
  • Automatic Arm Restraints
  • Heavy-Duty Dual 3/8" Equalizer Cables
  • Padded Overhead Safety-Shutoff Bar
  • Truck And Van Adapters Standard
  • ETL Approved
SPECIFICATIONS
  • Lift Style: Clearfloor
  • Lifting Capacity: 10,000 lbs.
  • Lifting Height: 78"
  • Lifting Time: 45 Seconds
  • Overall Height: 145"
  • Overall Width: 145"
  • Width Between Posts: 118"
  • Drive Thru Clearance: 109"
  • Minimum Pad Height: 4-1/2"
  • Motor: 220 VAC / 60 Hz. / 1 Ph.
Bend-Pak MX-12CTA
Two Post Lift • 12,000 lb. Capacity
Clear Floor Design with Triple Telescoping Arms
FEATURES
  • 12,000 Pound Lifting Capacity
  • Triple Telescoping Lift Arms
  • Single Piece Columns
  • Single Point Safety Release
  • Dual Hydraulic "Direct-Drive" Cylinders
  • Electric/Hydraulic Power System
  • Large, 3/4" A36 Steel Base Plate
  • Self-Lubricating Dura-Glide Polyethylene Bearing System
  • Safety Locks In Each Column Spaced Every 3-Inches
  • Automatic Arm Restraints
  • Heavy-Duty Dual Equalizer Cables
  • Padded Overhead Safety-Shutoff Bar
  • Truck And Van Adapters Standard
SPECIFICATIONS
  • Lift Style: Clearfloor
  • Lifting Capacity: 12,000 lbs.
  • Lifting Height: 78.5"
  • Lifting Time: 45 Seconds
  • Overall Height: 170"
  • Overall Width: 155"
  • Width Between Posts: 119"
  • Drive Thru Clearance: 105"
  • Minimum Pad Height: 5"
  • Motor: 220 VAC / 60 Hz. / 1 Ph.
 Bend-Pak PR-12FTA
Two Post Lift • 12,000 lb. Capacity
Floor Plate Design with Triple Telescoping Arms
FEATURES
  • 12,000 Pound Lifting Capacity
  • Triple Telescoping Lift Arms
  • Perfect for low ceiling applications
  • Dual Hydraulic Cylinders
  • Heavy-duty leaf chain
  • Electric/Hydraulic Operation
  • Automatic arm restraints
  • Low profile hard rubber lift pads
  • Limited 5-year warranty
SPECIFICATIONS
  • Lift Style: Floor Plate
  • Lifting Capacity: 12,000 lbs.
  • Lifting Height: 78.5"
  • Lifting Time: 45 Seconds
  • Overall Height: 134"
  • Overall Width: 155"
  • Width Between Posts: 118"
  • Drive Thru Clearance: 103"
  • Minimum Pad Height: 5"
  • Motor: 220 VAC / 60 Hz. / 1 Ph.
Bend-Pak Model MX-15C
Two Post Lift • 15,000 lb. Capacity
Clear Floor Design
FEATURES
  • 15,000 Pound Lifting Capacity
  • Single Piece Columns
  • Single Point Safety Release
  • Dual Hydraulic "Direct-Drive" Cylinders
  • Electric/Hydraulic Power System
  • Large, 3/4" A36 Steel Base Plate
  • Self-Lubricating Dura-Glide Polyethylene Bearing System
  • Safety Locks In Each Column Spaced Every 3-Inches
  • Automatic Arm Restraints
  • Heavy-Duty Dual Equalizer Cables
  • Padded Overhead Safety-Shutoff Bar
  • Truck And Van Adapters Standard
SPECIFICATIONS
  • Lift Style: Clearfloor
  • Lifting Capacity: 15,000 lbs.
  • Lifting Height: 78.5"
  • Lifting Time: 45 Seconds
  • Overall Height: 170"
  • Overall Width: 155"
  • Width Between Posts: 119"
  • Drive Thru Clearance: 105"
  • Minimum Pad Height: 5"
  • Motor: 220 VAC / 60 Hz. / 1 Ph.
 Bend-Pak MX-18C
Two Post Lift • 18,000 lb. Capacity
Clear Floor Design
FEATURES
  • 18,000 Pound Lifting Capacity
  • Single Piece Columns
  • Single Point Safety Release
  • Dual Hydraulic "Direct-Drive" Cylinders
  • Electric/Hydraulic Power System
  • Large, 3/4" A36 Steel Base Plate
  • Self-Lubricating Dura-Glide Polyethylene Bearing System
  • Safety Locks In Each Column Spaced Every 3-Inches
  • Automatic Arm Restraints
  • Heavy-Duty Dual Equalizer Cables
  • Padded Overhead Safety-Shutoff Bar
  • Truck And Van Adapters Standard
SPECIFICATIONS
  • Lift Style: Clearfloor
  • Lifting Capacity: 18,000 lbs.
  • Lifting Height: 78.5"
  • Lifting Time: 45 Seconds
  • Overall Height: 170"
  • Overall Width: 155"
  • Width Between Posts: 119"
  • Drive Thru Clearance: 105"
  • Minimum Pad Height: 5"
  • Motor: 220 VAC / 60 Hz. / 1 Ph.
Bend-Pak Model XL-9
Two Post Lift • 9,000 lb. Capacity
Floor Plate, Narrow Design
FEATURES
  • 9,000 pound lifting capacity
  • Narrow design
  • Dual hydraulic cylinders
  • Electric/hydraulic power system
  • Large, 17" x 17" A36 steel base plate
  • Self-lubricating Dura-Glide polyethylene bearing system
  • Safety locks in each column spaced every 2-inches
  • Automatic arm restraints
  • Heavy-duty chain lifting system
  • Low profile columns for low-ceiling applications
  • Truck and van adapters standard
  • ETL Approved
SPECIFICATIONS
  • Lift Style: Floor Plate
  • Lifting Capacity: 9,000 lbs.
  • Lifting Height: 78"
  • Lifting Time: 45 Seconds
  • Overall Height: 113"
  • Overall Width: 132"
  • Width Between Posts: 105.5"
  • Drive Thru Clearance: 96"
  • Minimum Pad Height: 4"
  • Motor: 220 VAC / 60 Hz. / 1 Ph.
 Bend-Pak XL-9X
Two Post Lift • 9,000 lb. Capacity
Floor Plate, Wide Design
FEATURES
  • 9,000 pound lifting capacity
  • Narrow design
  • Dual hydraulic cylinders
  • Electric/hydraulic power system
  • Large, 17" x 17" A36 steel base plate
  • Self-lubricating Dura-Glide polyethylene bearing system
  • Safety locks in each column spaced every 2-inches
  • Automatic arm restraints
  • Heavy-duty chain lifting system
  • Low profile columns for low-ceiling applications
  • Truck and van adapters standard
  • ETL Approved
SPECIFICATIONS
  • Lift Style: Floor Plate
  • Lifting Capacity: 9,000 lbs.
  • Lifting Height: 78"
  • Lifting Time: 45 Seconds
  • Overall Height: 113"
  • Overall Width: 145"
  • Width Between Posts: 118.5"
  • Drive Thru Clearance: 108.5"
  • Minimum Pad Height: 4"
  • Motor: 220 VAC / 60 Hz. / 1 Ph.
Bend-Pak MX-7CP
Two Post Lift • 7,000 lb. Capacity
Clear Floor, Narrow, Pad Style
FEATURES
  • 7,000 Pound Lifting Capacity
  • "Speed-Lane" Lift Pads For Quick Set-Up
  • Pads Are Adjustable For Different Width Vehicles
  • Wide Or Narrow Configuration
  • Single Piece Columns
  • Single Point Safety Release
  • Dual Hydraulic "Direct-Drive" Cylinders
  • Electric/Hydraulic Power System
  • Large, 17" x 17" A36 Steel Base Plate
  • Self-Lubricating Dura-Glide Polyethylene Bearing System
  • Safety Locks In Each Column Spaced Every 3-Inches
  • Heavy-Duty Dual 3/8" Equalizer Cables
  • Padded Overhead Safety-Shutoff Bar
  • Rubber Lift Blocks Included
SPECIFICATIONS
  • Lift Style: Clearfloor/Pad Lift
  • Lifting Capacity: 7,000 lbs.
  • Lifting Height: 74"
  • Lifting Time: 45 Seconds
  • Overall Height: 145"
  • Overall Width: 132"
  • Width Between Posts: 105"
  • Width Between Pads: 41" - 59"
  • Lift Pad Dimensions: 18" x 53"
  • Minimum Pad Height: 4"
  • Motor: 220 VAC / 60 Hz. / 1 Ph.
 Bend-Pak MX-7CPX
Two Post Lift • 7,000 lb. Capacity
Clear Floor, Wide, Pad Style
FEATURES
  • 7,000 Pound Lifting Capacity
  • "Speed-Lane" Lift Pads For Quick Set-Up
  • Pads Are Adjustable For Different Width Vehicles
  • Wide Or Narrow Configuration
  • Single Piece Columns
  • Single Point Safety Release
  • Dual Hydraulic "Direct-Drive" Cylinders
  • Electric/Hydraulic Power System
  • Large, 17" x 17" A36 Steel Base Plate
  • Self-Lubricating Dura-Glide Polyethylene Bearing System
  • Safety Locks In Each Column Spaced Every 3-Inches
  • Heavy-Duty Dual 3/8" Equalizer Cables
  • Padded Overhead Safety-Shutoff Bar
  • Rubber Lift Blocks Included
SPECIFICATIONS
  • Lift Style: Clearfloor/Pad Lift
  • Lifting Capacity: 7,000 lbs.
  • Lifting Height: 74"
  • Lifting Time: 45 Seconds
  • Overall Height: 145"
  • Overall Width: 145"
  • Width Between Posts: 118"
  • Width Between Pads: 28" - 46"
  • Lift Pad Dimensions: 18" x 53"
  • Minimum Pad Height: 4"
  • Motor: 220 VAC / 60 Hz. / 1 Ph.
Note: The features and specifications listed above are provided by the manufacturer(s) and may change without notice.
         Call Vehicle Service Equipment for Information.
About Us | Contact Us | Privacy | ©2005 Vehicle Service Equipment Corporation