HD-14LSX - 14,000 lb. Capacity
Extended, Alignment Style
Features
- 14,000-lb. lifting capacity
- Extended runway length for servicing longer vehicles
- Longer style approach ramps for low ground clearance vehicles
- Runways include rail-kit for optional accessories
- Runways adjust for different tread widths
- Multiple auto-leveling locking positions
- Equipped with rear slip plates and front turn plates
- Multiple turn plate pockets for better wheelbase accommodation
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal anti-sway slider blocks in each column
- Pneumatic push-button safety release
- Features heavy-duty 1/2" aircraft cable
- Safety locks enclosed in columns minimize pinch points
- Oversized sheave diameter reduces cable fatigue
- Runways feature non-skid surface
- Rugged, self-lubricating cable sheaves
- Features 1-3/8" sheave axles
- Multi-position safety locks in each column
- Independent backup slack-cable safety latches
- Features fully adjustable lock stops for precise leveling
- Integrated rolling bridge airline kit option available
- Roll-back kit options available
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)
Specifications
- Lifting capacity: 14,000 lbs. / 6,350 kg
- Front axle max capacity: 7,000 lbs. / 3,175 kg
- Rear axle min capacity: 7,000 lbs. / 3,175 kg
- Overall width: 126" / 3,200 mm
- Outside length: 205" / 5,207 mm
- Overall length: 235" / 5,969 mm
- Height of columns: 88" / 2,235 mm
- Runway min height: 9-1/4" / 235 mm
- Max rise: 70" / 1,778 mm
- Max lifting height: 79-1/4" / 2,013 mm
- Width between posts: 116" / 2,946 mm
- Runway width: 20" / 508 mm
- Width between runways: 37" – 49" / 940 mm – 1,245 mm
- Length of runways: 198" / 5,029 mm
- Min 4-wheel alignment: 72" / 1,828 mm
- Max 4-wheel alignment: 135" / 3,428 mm
- Max 2-wheel alignment: 174" / 4,420 mm
- Min wheelbase @ rated capacity: 140" / 3,556 mm
- Min wheelbase @ 75% capacity: 120" / 3,048 mm
- Min wheelbase @ 50% capacity: 100" / 2,540 mm
- Min wheelbase @ 25% capacity: 80" / 2,032 mm
- Locking positions: 13
- Lock spacing: every 4" / 102 mm
- Lifting time: 60 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 2,693 lbs. / 1,222 kg
- Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm
Note: An air supply (minimum: 115 psi / 15 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Related Products
|
HD-14LSXE - 14,000 lb. Capacity
Extended, Alignment, Limousine Style
Features
- 14,000-lb. lifting capacity
- Extended runway length for servicing longer vehicles
- Longer style approach ramps for low ground clearance vehicles
- Runways include rail-kit for optional accessories
- Runways adjust for different tread widths
- Multiple auto-leveling locking positions
- Equipped with rear slip plates and front turn plates
- Multiple turn plate pockets for better wheelbase accommodation
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal anti-sway slider blocks in each column
- Pneumatic push-button safety release
- Features heavy-duty 1/2" aircraft cable
- Safety locks enclosed in columns minimize pinch points
- Oversized sheave diameter reduces cable fatigue
- Runways feature non-skid surface
- Rugged, self-lubricating cable sheaves
- Features 1-3/8" sheave axles
- Multi-position safety locks in each column
- Independent backup slack-cable safety latches
- Features fully adjustable lock stops for precise leveling
- Integrated rolling bridge airline kit option available
- Roll-back kit options available
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)
Specifications
- Lifting capacity: 14,000 lbs. / 6,350 kg
- Front axle max capacity: 7,000 lbs. / 3,175 kg
- Rear axle min capacity: 7,000 lbs. / 3,175 kg
- Overall width: 126" / 3,200 mm
- Outside length: 243" / 6,172 mm
- Overall length: 273" / 6,934 mm
- Height of columns: 88" / 2,235 mm
- Runway min height: 9-1/4" / 235 mm
- Max rise: 70" / 1,778 mm
- Max lifting height: 79-1/4" / 2,013 mm
- Width between posts: 116" / 2,946 mm
- Runway width: 20" / 508 mm
- Width between runways: 37" – 49" / 940 mm – 1,245 mm
- Length of runways: 236" / 5,994 mm
- Min 4-wheel alignment: 72" / 1,828 mm
- Max 4-wheel alignment: 135" / 3,428 mm
- Max 2-wheel alignment: 212" / 5,385 mm
- Min wheelbase @ rated capacity: 170" / 4,318 mm
- Min wheelbase @ 75% capacity: 145" / 3,683 mm
- Min wheelbase @ 50% capacity: 120" / 3,048 mm
- Min wheelbase @ 25% capacity: 95" / 2,413 mm
- Locking positions: 13
- Lock spacing: every 4" / 102 mm
- Lifting time: 60 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 3,455 lbs. / 1,567 kg
- Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm
Note: An air supply (minimum: 115 psi / 15 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Related Products
|
HD-14S - 14,000 lb. Capacity
Alignment Style
Features
- 14,000-lb. lifting capacity
- Longer style approach ramps for low ground clearance vehicles
- Runways include rail-kit for optional accessories
- Runways adjust for different tread widths
- Multiple auto-leveling locking positions
- Equipped with rear slip plates and front turn plates
- Multiple turn plate pockets for better wheelbase accommodation
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal anti-sway slider blocks in each column
- Pneumatic push-button safety release
- Features heavy-duty 1/2" aircraft cable
- Safety locks enclosed in columns minimize pinch points
- Oversized sheave diameter reduces cable fatigue
- Runways feature non-skid surface
- Rugged, self-lubricating cable sheaves
- Features 1-3/8" sheave axles
- Multi-position safety locks in each column
- Independent backup slack-cable safety latches
- Features fully adjustable lock stops for precise leveling
- Integrated rolling bridge airline kit option available
- Roll-back kit options available
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)
Specifications
- Lifting capacity: 14,000 lbs. / 6,350 kg
- Front axle max capacity: 7,000 lbs. / 3,175 kg
- Rear axle min capacity: 7,000 lbs. / 3,175 kg
- Overall width: 126" / 3,200 mm
- Outside length: 181" / 4,597 mm
- Overall length: 211" / 5,360 mm
- Height of columns: 88" / 2,235 mm
- Runway min height: 9-1/4" / 235 mm
- Max rise: 70" / 1,778 mm
- Max lifting height: 79-1/4" / 2,013 mm
- Width between posts: 116" / 2,946 mm
- Runway width: 20" / 508 mm
- Width between runways: 37" – 49" / 940 mm – 1,245 mm
- Length of runways: 174" / 4,420 mm
- Min 4-wheel alignment: 72" / 1,828 mm
- Max 4-wheel alignment: 135" / 3,428 mm
- Max 2-wheel alignment: 150" / 3,810 mm
- Min wheelbase @ rated capacity: 125" / 3,175 mm
- Min wheelbase @ 75% capacity: 105" / 2,667 mm
- Min wheelbase @ 50% capacity: 90" / 2,286 mm
- Min wheelbase @ 25% capacity: 70" / 1,778 mm
- Locking positions: 13
- Lock spacing: every 4" / 102 mm
- Lifting time: 60 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 2,105 lbs. / 955 kg
- Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm
Note: An air supply (minimum: 115 psi / 15 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Related Products
|
XR-12AE - 12,000 lb. Capacity
Extended, Alignment, Scissors Style
Features
- 12,000-lb. lifting capacity
- Extended wheelbase design
- Equipped with two heavy-duty truck turn plates and full-floating rear slip plates
- Turn plate pockets feature adjustable leveling bolts for incremental turn plate leveling
- Front tire stops lower out of the way for front-end access
- Convenient pull-out work stands are located up front
- Non-skid runway surface provides added traction
- Electric / hydraulic power system
- Simple operator controls
- Approach ramps include built-in pull-out extensions for low-to-ground vehicles
- Approach ramps employ hinges for folding and stowing
- Quad-cylinder hydraulic design provides extra power and precise leveling
- Clear center and open front
- Automatic leveling system with multiple auto-leveling locking positions
- Pneumatic push-button safety release
- Dual automatic safety locks
- Heavy bottom frame is a single piece
- Optional 6,000-lb. capacity bridge jacks available
- Rolling bridge airline kit option available
Specifications
- Lifting capacity: 12,000 lbs. / 5,443 kg
- Max lifting height: 70" / 1,778 mm
- Lowered height: 12" / 305 mm
- Overall length with approach ramps: 253" / 6,426 mm
- Overall width: 88" / 2,235 mm
- Runway width: 25" / 635 mm
- Minimum 4-wheel alignment: 100" / 2,540 mm
- Maximum 4-wheel alignment: 165" / 4,191 mm
- Maximum 2-wheel alignment: 172" / 4,369 mm
- Maximum general wheelbase: 178" / 4,445 mm
- Lifting time: 75 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 4,857 lbs. / 2,203 kg
- Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm
Note: An air supply (minimum: 115 psi / 15 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Related Products
|
HDO-14LSX - 14,000 lb. Capacity
Open Front, Extended, Alignment Style
Features
- 14,000-lb. lifting capacity
- Extremely convenient open-front design for easy access
- Extended runway length for servicing
- Longer approach ramps for low ground clearance vehicles
- Electric / hydraulic power system
- Runways include rail-kit for optional accessories
- Runways adjust for different tread widths
- Automatic leveling system with multiple auto-leveling locking positions
- Equipped with heavy-duty rear slip plates and front turn plates
- Multiple turn plate pockets for better wheelbase accommodation
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal anti-sway slider blocks in each column
- Pneumatic push-button safety release
- Features heavy-duty 1/2" aircraft cable
- Safety locks enclosed in columns minimize pinch points
- Oversized sheave diameter reduces cable fatigue
- Runways feature non-skid surface
- Rugged, self-lubricating cable sheaves
- Features 1-3/8" sheave axles
- Multi-position safety locks in each column
- Independent backup slack-cable safety latches
- Includes fully adjustable lock stops for precise leveling
- Integrated rolling bridge airline kit option available
- Roll-back kit options available
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)
Specifications
- Lifting capacity: 14,000 lbs. / 6,350 kg
- Front axle max capacity: 7,000 lbs. / 3,175 kg
- Rear axle min capacity: 7,000 lbs. / 3,175 kg
- Overall front width: 139" / 3,531 mm
- Overall rear width: 126" / 3,200 mm
- Outside length: 208" / 5,283 mm
- Overall length: 238" / 6,045 mm
- Height of front columns: 100" / 2,540 mm
- Height of rear columns: 88" / 2,235 mm
- Runway min height: 9-1/4" / 235 mm
- Max rise: 70" / 1,778 mm
- Max lifting height: 79-1/4" / 2,013 mm
- Width between posts: 116" / 2,946 mm
- Runway width: 20" / 508 mm
- Width between runways: 43" / 1,092 mm
- Length of runways: 198" / 5,029 mm
- Min 4-wheel alignment: 72" / 1,828 mm
- Max 4-wheel alignment: 135" / 3,428 mm
- Max 2-wheel alignment: 174" / 4,420 mm
- Min wheelbase @ rated capacity: 140" / 3,556 mm
- Min wheelbase @ 75% capacity: 120" / 3,048 mm
- Min wheelbase @ 50% capacity: 100" / 2,540 mm
- Min wheelbase @ 25% capacity: 80" / 2,032 mm
- Locking positions: 13
- Lock spacing: every 4" / 102 mm
- Lifting time: 60 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 3,988 lbs. / 1,813 kg
- Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm
Note: An air supply (minimum: 115 psi / 15 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Related Products
|
HD-18A - 18,000 lb. Capacity
Heavy Duty Alignment Style
Features
- 18,000-lb. lifting capacity
- Runways include rail-kit for optional accessories
- Runways adjust for different tread widths
- Electric / hydraulic power system
- Equipped with heavy-duty rear slip plates and front turn plates
- Multiple turn plate pockets for better wheelbase accommodation
- Fully enclosed lifting cables, safety locks, and sheaves
- Automatic leveling system with multiple auto-leveling locking positions
- Includes fully adjustable lock stops for precise leveling
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Features heavy-duty 3/4" aircraft cable
- Rugged, 4" main sheave axles
- Oversized sheave diameter reduces cable fatigue
- Independent backup slack-cable safety latches
- Multi-position safety locks in each column
- Safety locks enclosed in columns minimize pinch points
- Pneumatic push-button safety release
- Runways feature non-skid surface
- Rollback kit options available
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 9k – 25k capacity bridge jacks available
Specifications
- Lifting capacity: 18,000 lbs. / 8,165 kg
- Front axle max capacity: 9,000 lbs. / 4,082 kg
- Rear axle min capacity: 9,000 lbs. / 4,082 kg
- Overall width: 154" / 3,912 mm
- Outside length: 201" / 5,105 mm
- Overall length: 241" / 6,121 mm
- Height of columns: 93" / 2,362 mm
- Min runway height: 10-1/2" / 267 mm
- Max rise: 60" / 1,524 mm
- Max lifting height: 70-1/2" / 1,791 mm
- Width between posts: 134" / 3,404 mm
- Runway width: 22" / 559 mm
- Width between runways: 38" – 56" / 965 mm – 1,422 mm
- Length of runways: 203" / 5,156 mm
- Min 4-wheel alignment: 83" / 2,108 mm
- Max 4-wheel alignment: 138" / 3,505 mm
- Max 2-wheel alignment: 151" / 3,835 mm
- Min wheelbase @ rated capacity: 145" / 3,683 mm
- Min wheelbase @ 75% capacity: 125" / 3,175 mm
- Min wheelbase @ 50% capacity: 105" / 2,667 mm
- Min wheelbase @ 25% capacity: 85" / 2,159 mm
- Locking positions: 9
- Lock spacing: every 6" / 152 mm
- Lifting time: 75 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 5,582 lbs. / 2,537 kg
- Shipping dimensions: 204" x 24" x 48" / 5,182 mm x 610 mm x 1,219 mm
Note: An air supply (minimum: 115 psi / 15 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Related Products
|
HD-27A - 27,000 lb. Capacity
Heavy Duty Alignment Style
Features
- 27,000-lb. lifting capacity
- Runways include rail-kit for optional accessories
- Runways adjust for different tread widths
- Electric / hydraulic power system
- Equipped with heavy-duty rear slip plates and front turn plates
- Multiple turn plate pockets for better wheelbase accommodation
- Fully enclosed lifting cables, safety locks, and sheaves
- Automatic leveling system with multiple auto-leveling locking positions
- Includes fully adjustable lock stops for precise leveling
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Features heavy-duty 3/4" aircraft cable
- Rugged, 4" main sheave axles
- Oversized sheave diameter reduces cable fatigue
- Independent backup slack-cable safety latches
- Multi-position safety locks in each column
- Safety locks enclosed in columns minimize pinch points
- Pneumatic push-button safety release
- Runways feature non-skid surface
- Rollback kit options available
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 9k – 25k capacity bridge jacks available
Specifications
- Lifting capacity: 27,000 lbs. / 12,247 kg
- Front axle max capacity: 13,500 lbs. / 6,124 kg
- Rear axle min capacity: 13,500 lbs. / 6,124 kg
- Overall width: 154" / 3,912 mm
- Outside length: 257" / 6,528 mm
- Overall length: 297" / 7,544 mm
- Height of columns: 93" / 2,362 mm
- Min runway height: 10-1/2" / 267 mm
- Max rise: 60" / 1,524 mm
- Max lifting height: 70-1/2" / 1,791 mm
- Width between posts: 134" / 3,404 mm
- Runway width: 22" / 559 mm
- Width between runways: 38" – 56" / 965 mm – 1,422 mm
- Length of runways: 263" / 6,680 mm
- Min 4-wheel alignment: 83" / 2,108 mm
- Max 4-wheel alignment: 138" / 3,505 mm
- Max 2-wheel alignment: 211" / 5,359 mm
- Min wheelbase @ rated capacity: 185" / 4,699 mm
- Min wheelbase @ 75% capacity: 160" / 4,064 mm
- Min wheelbase @ 50% capacity: 135" / 3,429 mm
- Min wheelbase @ 25% capacity: 110" / 2,794 mm
- Locking positions: 9
- Lock spacing: every 6" / 152 mm
- Lifting time: 75 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 7,054 lbs. / 3,206 kg
- Shipping dimensions: 276" x 24" x 36" / 7,010 mm x 610 mm x 914 mm
Note: An air supply (minimum: 115 psi / 15 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Related Products
|
HD-27XA - 27,000 lb. Capacity
Heavy Duty, Extended, Alignment Style
Features
- 27,000-lb. lifting capacity
- Extended length runways to accommodate larger wheelbases
- Runways include rail-kit for optional accessories
- Runways adjust for different tread widths
- Electric / hydraulic power system
- Equipped with heavy-duty rear slip plates and front turn plates
- Multiple turn plate pockets for better wheelbase accommodation
- Fully enclosed lifting cables, safety locks, and sheaves
- Automatic leveling system with multiple auto-leveling locking positions
- Includes fully adjustable lock stops for precise leveling
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Features heavy-duty 3/4" aircraft cable
- Rugged, 4" main sheave axles
- Oversized sheave diameter reduces cable fatigue
- Independent backup slack-cable safety latches
- Multi-position safety locks in each column
- Safety locks enclosed in columns minimize pinch points
- Pneumatic push-button safety release
- Runways feature non-skid surface
- Rollback kit options available
- Optional drive-thru ramps available
- Optional drip trays available
Specifications
- Lifting capacity: 27,000 lbs. / 12,247 kg
- Front axle max capacity: 13,500 lbs. / 6,124 kg
- Rear axle min capacity: 13,500 lbs. / 6,124 kg
- Overall width: 154" / 3,912 mm
- Outside length: 317" / 8,052 mm
- Overall length: 357" / 9,068 mm
- Height of columns: 93" / 2,362 mm
- Min runway height: 10-1/2" / 267 mm
- Max rise: 60" / 1,524 mm
- Max lifting height: 70-1/2" / 1,791 mm
- Width between posts: 134" / 3,404 mm
- Runway width: 22" / 559 mm
- Width between runways: 38" – 56" / 965 mm – 1,422 mm
- Length of runways: 323" / 8,204 mm
- Min 4-wheel alignment: 83" / 2,108 mm
- Max 4-wheel alignment: 138" / 3,505 mm
- Max 2-wheel alignment: 271" / 6,883 mm
- Min wheelbase @ rated capacity: 230" / 5,842 mm
- Min wheelbase @ 75% capacity: 195" / 4,953 mm
- Min wheelbase @ 50% capacity: 165" / 4,191 mm
- Min wheelbase @ 25% capacity: 130" / 3,302 mm
- Locking positions: 9
- Lock spacing: every 6" / 152 mm
- Lifting time: 75 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 7,591 lbs. / 3,451 kg
- Shipping dimensions: 324" x 24" x 36" / 82,30 mm x 610 mm x 914 mm
Note: An air supply (minimum: 115 psi / 15 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Related Products
|
HD-35A - 35,000 lb. Capacity
Heavy Duty Alignment Style
Features
- 35,000-lb. lifting capacity
- Runways include rail-kit for optional accessories
- Runways adjust for different tread widths
- Electric / hydraulic power system
- Equipped with heavy-duty rear slip plates and front turn plates
- Multiple turn plate pockets for better wheelbase accommodation
- Fully enclosed lifting cables, safety locks, and sheaves
- Automatic leveling system with multiple auto-leveling locking positions
- Includes fully adjustable lock stops for precise leveling
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Features heavy-duty 3/4" aircraft cable
- Rugged, 4" main sheave axles
- Oversized sheave diameter reduces cable fatigue
- Independent backup slack-cable safety latches
- Multi-position safety locks in each column
- Safety locks enclosed in columns minimize pinch points
- Pneumatic push-button safety release
- Runways feature non-skid surface
- Rollback kit options available
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 9k – 25k capacity bridge jacks available
Specifications
- Lifting capacity: 35,000 lbs. / 15,876 kg
- Front axle max capacity: 17,500 lbs. / 7,938 kg
- Rear axle min capacity: 17,500 lbs. / 7,938 kg
- Overall width: 154" / 3,912 mm
- Outside length: 257" / 6,528 mm
- Overall length: 297" / 7,544 mm
- Height of columns: 93" / 2,362 mm
- Min runway height: 10-1/2" / 267 mm
- Max rise: 60" / 1,524 mm
- Max lifting height: 70-1/2" / 1,791 mm
- Width between posts: 134" / 3,404 mm
- Runway width: 28" / 711 mm
- Width between runways: 36" – 47" / 914 mm – 1,194 mm
- Length of runways: 263" / 6,680 mm
- Min 4-wheel alignment: 83" / 2,108 mm
- Max 4-wheel alignment: 138" / 3,505 mm
- Max 2-wheel alignment: 211" / 5,359 mm
- Min wheelbase @ rated capacity: 185" / 4,699 mm
- Min wheelbase @ 75% capacity: 160" / 4,064 mm
- Min wheelbase @ 50% capacity: 135" / 3,429 mm
- Min wheelbase @ 25% capacity: 110" / 2,794 mm
- Locking positions: 9
- Lock spacing: every 6" / 152 mm
- Lifting time: 75 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 7,989 lbs. / 3,631 kg
- Shipping dimensions: 264" x 30" x 48" / 6,706 mm x 762 mm x 1,219 mm
Note: An air supply (minimum: 115 psi / 15 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Related Products
|
HD-35XA - 35,000 lb. Capacity
Heavy Duty, Extended, Alignment Style
Features
- 35,000-lb. lifting capacity
- Extended length runways to accommodate larger wheelbases
- Runways include rail-kit for optional accessories
- Runways adjust for different tread widths
- Electric / hydraulic power system
- Equipped with heavy-duty rear slip plates and front turn plates
- Multiple turn plate pockets for better wheelbase accommodation
- Fully enclosed lifting cables, safety locks, and sheaves
- Automatic leveling system with multiple auto-leveling locking positions
- Includes fully adjustable lock stops for precise leveling
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Features heavy-duty 3/4" aircraft cable
- Rugged, 4" main sheave axles
- Oversized sheave diameter reduces cable fatigue
- Independent backup slack-cable safety latches
- Multi-position safety locks in each column
- Safety locks enclosed in columns minimize pinch points
- Pneumatic push-button safety release
- Runways feature non-skid surface
- Rollback kit options available
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 9k – 25k capacity bridge jacks available
Specifications
- Lifting capacity: 35,000 lbs. / 15,876 kg
- Front axle max capacity: 17,500 lbs. / 7,938 kg
- Rear axle min capacity: 17,500 lbs. / 7,938 kg
- Overall width: 154" / 3,912 mm
- Outside length: 317" / 8,052 mm
- Overall length: 357" / 9,068 mm
- Height of columns: 93" / 2,362 mm
- Min runway height: 10-1/2" / 267 mm
- Max rise: 60" / 1,524 mm
- Max lifting height: 70-1/2" / 1,791 mm
- Width between posts: 134" / 3,404 mm
- Runway width: 28" / 711 mm
- Width between runways: 36" – 47" / 914 mm – 1,194 mm
- Length of runways: 323" / 8,204 mm
- Min 4-wheel alignment: 83" / 2,108 mm
- Max 4-wheel alignment: 138" / 3,505 mm
- Max 2-wheel alignment: 271" / 6,883 mm
- Min wheelbase @ rated capacity: 230" / 5,842 mm
- Min wheelbase @ 75% capacity: 195" / 4,953 mm
- Min wheelbase @ 50% capacity: 165" / 4,191 mm
- Min wheelbase @ 25% capacity: 130" / 3,302 mm
- Locking positions: 9
- Lock spacing: every 6" / 152mm
- Lifting time: 75 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 9,046 lbs. / 4,112 kg
- Shipping dimensions: 324" x 30" x 48" / 8,230 mm x 762 mm x 1,219 mm
Note: An air supply (minimum: 115 psi / 15 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Related Products
|
Note: The features and specifications listed above are provided by the
manufacturer(s) and may change without notice.
Call
Vehicle Service Equipment for Information. |
.gif){kind=logo}