Balancer Wheel Mounting Adaptor Kits
Part Number |
Description |
Weight |
20-1167-1 |
Basic - Standard Taper Cone Mounting Kit: (4) Cone Set Includes: 192-86-2, 192-87-2, 192-88-2, 192-89-2,
Range: 1.69" - 5.18" (not recommended for GSP Road Force Measurement)
|
12 |
20-1626-1 |
Basic - Low Taper Cone Mounting Kit: (7) Cone Set Includes: 192-51-2, 192-53-2, 192-54-2, 192-55-2,
192-56-2, 192-57-2, Range: 1.69" - 5.18"
|
24 |
20-1910-1 |
Preferred - Standard Taper Cone & Flange Plate Mounting Kit: (4) Cones, (4) In-Between Cones,
LT/HP Wheel Spacer Ring, Adjustable Flange Plate Kit, Accessories and Pin Tray Includes: 20-1626-1,
20-1328-1, 20-1839-1, 20-1879-1, Range: 1.69" - 5.18"
|
50 |
20-1911-1 |
Preferred - Low Taper Cone & Flange Plate Mounting Kit: (7) Cones, (4) In-Between Cones,
LT/HP Wheel Spacer Ring, Adjustable Flange Plate Kit, Accessories and Pin Tray Includes: 20-1626-1,
20-1328-1, 20-1839-1, 20-1879-1, Range: 1.69" - 5.18"
|
70 |
20-1912-1 |
Preferred - Direct-Fit Collet & Flange Plate Mounting Kit: (16) Direct-Fit Two Sided Collet Set,
LT/HP Wheel Spacer Ring, Adjustable Flange Plate Kit, Accessories and Pin Storage Bench Includes:
20-1847-1, 20-1846-1, 46-433-2, Range: 2.10 " - 5.18" (most accurate centering with broadest
application coverage)
|
100 |
20-1167-1 |
Medium Truck Wheel Mounting Kit: (2) Extra Large Truck Cones, (2) Spacer Rings and TruckChuck
Wheel & Drum Centering Kit, Includes: 20-1602-1, 20-1207-1, 20-1929-1, Range: 3.13" - 9.13"
|
25 |
Balancer Options, Kits & Accessories
Part Number |
Description |
Weight |
20-1821-2 |
Wheel Weight Master Assortment by Perfect Weight Corporation, Coated and Uncoated Wheel Weights,
Clip-On "P", "T", "AW", "MC", "LH", "IAW",
"EN", "FN" and 1/4oz. and 1/2oz. Adhesive Pre-Taped Weights, Storage Unit, Label Set,
Application info and Counter Cards.
|
219 |
20-1710-1 |
StraightTrak LFM Tire Pull Feature, Field Retrofit Kit (lifts most GSP9712 01/02 &newer) |
5 |
20-1650-1 |
Rim Tag Kit (5 of each color), 24-129-2 Blue, 24-130-2 Red, 24-131-2 Green, 24-132-2 Yellow |
1 |
20-1635-1 |
GSP9702 Inflation Station Upgrade Kit (requires software P/N 20-1453-1) |
25 |
20-1605-1 |
Printer Package and Storage Drawer Kit(GSP9712), HD 9 Pin, Dot Matrix, 110v, Transformer and Hardware |
50 |
20-1495-1 |
Printer Package and Side Storage Support Kit (GSP9702), HD 9 Pin, Dot Matrix, 110v, Transformer and Hardware |
35 |
20-1493-1 |
Printer Support and Hardware (no printer), Side Mount Requires DOT Matrix Printer 167-69-1,
Cable 38-485-2 (Power) and 38-657-2 (data) |
17 |
20-1453-1 |
GSP Software Cartridge, Operation Manual (Current Software Version 4.3.x) |
2 |
20-1112-1 |
Bolt-Down Kit (GSP/DSP Balancers) |
1 |
167-69-1 |
Printer, Dot Matrix (GSP9700), Requires 110v Outlet, Transformer, Cables 38-485-2 (power)
and 38-657-2 (data) Not Included. |
12 |
229-87-1 |
Printer Drawer Only, Fits Dot Matrix Printer 167-69-1 (GSP9700 and GSP9600) |
15 |
Mounting Adaptors Kits, Cones, and Spacer Rings
Part Number |
Description |
Weight |
20-1929-1 |
Medium Duty Truck Kit |
|
20-1915-1 |
GSP9700 Inner Arm Extension Kit and Software Upgrade, 30" Capability |
|
20-1879-1 |
Storage HAnger, Side Mount Direct-Fit Collets (GSP9700/9600, DSP9600/9100) |
|
20-1854-2 |
TruckChuck HD Jaw Extension Kit, Fits TruckChuck 175-286-2, Extended Clamping Range, 5.13" - 9.13" |
4 |
10-1847-1 |
HunterPro Precision Wheel Centering Kit, Adjustable Flange Plate & stud Kit 20-1839-1,
Passenger Car and LT Direct-Fit Dual Taper Collet Kit 20-1845-1, Storage Hanger Kit and Color
ID Decals 20-1879-1 and Identification Gauge |
|
20-1846-1 |
Direct-Fit, Dual Taper Collet Kit, 3-4 Ton & Import LT 192-164-2, 192-167-2, 192-168-2, 192-169-2,
192-170-2, 192-172-2, 192-173-2, 192-174-2, 192-175-2, Color ID Decals and Identification Gauge |
|
20-1845-1 |
Direct-Fit, Dual Taper Collet Kit, Passenger Car & LT 195-154-2, 192-155-2, 192-156-2, 192-157-2,
192-158-2, 192-159-2, 192-160-2, 192-161-2, 192-162-2, Color ID Decals and Identification Gauge |
|
20-1839-1 |
Adjustable Flange Plate & Stud Kit, Fits 3, 4, 5, 6, 7 and 8 Lug Bolt Circles. Plate 175-342-1,
(7) Pins 135-378-1, (7) Conical 1" O.D. Sleeves 106-143-2, (5) Spherical 7/8 " O.D.
Sleeves 106-144-2, (5) Conical 3/4 " O.D. Sleeves 106-145-2 |
19 |
20-1602-1 |
TruckChuck Wheel & Drum Balancing Kit, Includes Chuck and Jaws 175-286-2, 9" Clamp Cup 175-296-2,
9" Protector Sleeve 106-127-2 and 20-1854-2 Extended Jaws Kit |
24 |
20-1328-1 |
Cone Kit and Spacer Ring, Includes In-Between Cones, 192-96-2, 192-97-2, 192-98-2, 192-99-2 and
Steel Spacer 46-433-2 |
19 |
20-1207-1 |
Truck Cone Kit, Extra Large Truck Cone 192-92-2 and Plastic Spacer Ring 46-309-2 |
12 |
46-562-2 |
Spacer, Truck Wheels (fits 192-178-2) |
|
46-511-2 |
Spacer Ring, Mini-Cooper Wheel, Steel |
1 |
46-433-2 |
Spacer Ring, Light Truck & Performance Wheel, Steel |
1 |
46-320-2 |
Spacer Washer, Polymer |
1 |
46-309-2 |
Spacer Ring, Extra Large Truck Cone, Polymer |
1 |
76-379-2 |
Cone Retainer Ring, Secures Low Taper Cones to Balancer Shaft |
1 |
106-145-2 |
Pin End Sleeve for Adjustable Flange Plate 20-1839-1, 3/4" Diameter, Conical End, (each) |
1 |
106-144-2 |
Pin End Sleeve for Adjustable Flange Plate 20-1839-1, 7/8" Diameter, Spherical End, (each) |
1 |
106-143-2 |
Pin End Sleeve for Adjustable Flange Plate 20-1839-1, 1 " Diameter, Spherical End, (each) |
1 |
192-178-2 |
Cone, Low Taper (8.50" - 8.90") |
|
192-175-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (4.950" - 5.175") |
9 |
192-174-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (4.800" - 5.025") |
8 |
192-173-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (4.650" - 4.875") |
8 |
192-172-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (4.500" - 5.725") |
7 |
192-170-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (4.200" - 4.425") |
6 |
192-169-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (4.050" - 4.275") |
6 |
192-168-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (3.900" - 4.125") |
5 |
192-167-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (3.750" - 3.975") |
5 |
192-165-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (3.300" - 3.525") |
2 |
192-164-2 |
Cone, Special-BMW, Two Step, Low Taper, (71mm - 74mm, 56mm - 58mm) |
4 |
192-161-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (3.150" - 3.375") |
3 |
192-160-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (3.000" - 3.225") |
3 |
192-159-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (2.850" - 3.075") |
2 |
192-158-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (2.700" - 2.925") |
2 |
192-157-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (2.550" - 2.775") |
6 |
192-156-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (2.400" - 2.625") |
2 |
192-155-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (2.250" - 2.475") |
2 |
192-154-2 |
Collet, Direct-Fit, Two Sided, Low Taper, (2.100" - 2.325") |
1 |
192-152-2 |
Cone, Special-Range Rover, (2.73" - 2.94") |
|
192-148-2 |
Cone, Special-Mazda, (2.57" - 2.94") |
2 |
192-147-2 |
Cone, Special-Porsche, (2.69" - 2.94") |
2 |
192-132-2 |
Cone, Special-Mercedez-Benz, (2.73" - 2.94") |
2 |
192-131-2 |
Cone, Special-Honda Passport, (2.50" - 2.94") |
6 |
192-99-2 |
Cone, In-Between DSP Size, (3.74" - 4.62") |
5 |
192-98-2 |
Cone, In-Between DSP Size, (3.21" - 3.89") |
4 |
192-97-2 |
Cone, In-Between DSP Size, (2.68" - 3.36") |
4 |
192-96-2 |
Cone, In-Between DSP Size, (2.15" - 2.83") |
3 |
192-93-2 |
Cone, IRL/CART Special Racing Adaptor w/ Retainer Ring |
2 |
192-92-2 |
Cone, Extra-Large Truck Cone, Two Sided High Taper (5.00" - 6.62", 6.68" - 6.94") |
7 |
192-89-2 |
Cone DSP Light Truck, (3.43 - 5.18") |
7 |
192-88-2 |
Cone DSP Balancer, (2.93 - 3.62") |
4 |
192-87-2 |
Cone DSP Balancer, (2.43 - 3.06") |
2 |
192-86-2 |
Cone DSP Balancer, (1.62 - 2.56") |
1 |
192-83-2 |
Cone, Indy Lights Special Racing Adaptor |
1 |
192-57-2 |
Cone, GSP Balancer Low Degree Taper, (4.25" - 5.13") |
8 |
192-56-2 |
Cone, GSP Balancer Low Degree Taper, (3.50" - 4.31") |
5 |
192-55-2 |
Cone, GSP Balancer Low Degree Taper, (3.25" - 3.62") |
4 |
192-54-2 |
Cone, GSP Balancer Low Degree Taper, (2.87" - 3.25") |
3 |
192-53-2 |
Cone, GSP Balancer Low Degree Taper, (2.50" - 2.87") |
2 |
192-52-2 |
Cone, GSP Balancer Low Degree Taper, (2.20" - 2.50") |
2 |
192-51-2 |
Cone, GSP Balancer Low Degree Taper, (1.75" - 2.20") |
2 |
Special Tools & Accessories
Part Number |
Description |
Weight |
20-1738-1 |
Hood Kit, See-Through Demo Kit for GSP9700/GSP9600 |
6 |
20-1435-1 |
Tool, Road Force Demonstration Tool |
2 |
20-1051-1 |
Dataset, Inner Arm Upgrade (DSP Balancers Only, Serial # 3583 & higher) |
9 |
65-72-2 |
Tool, Calibration Weight, Balancing, (DSP and GSP) |
1 |
97-302-2 |
Shaft Stub, Centerless Wheel Mounting (DSP9500/9000/8500 Only) |
1 |
128-421-2 |
Labels, Weight Tray |
1 |
192-117-2 |
Offset Cone - Mounting Error/Road Force Demo Cone, (GSP) |
2 |
214-122-2 |
Placard Flip-Chart, Application Guide for OEM Cone Sizes, Wheel Weight Types
and Lug Nut Torque (DSP9600-9100) |
3 |
221-541-1 |
Tool, Shaft Removal, (DSP9500/9000/8500) |
3 |
221-589-2 |
Hammer/Pliers, Weight |
1 |
221-571-2 |
Tool, Bolt Circle Measuring |
1 |
221-563-1 |
Caliper, Rim Width/Internal Diameter |
2 |
221-619-2 |
Toll, 14mm Allen Key, Shaft and Hub Removal, (GSP9702, DSP7700) |
2 |
221-658-2 |
Hammer Head Replacement Pack - ALU |
1 |
221-659-2 |
Scraper, Adhesive Weight Tool |
1 |
Wing Nuts, Cups & Shafts
Part Number |
Description |
Weight |
223-68-1 |
Pressure Ring, Clip-On, Fits Aluminum Wing Nuts 76-371-3, & 76-390-1 |
1 |
223-53-2 |
Pressure Ring, Clip-On, Fits Cast Wing Nuts 76-348-3, 76-255, and Haweka Pro Grip |
1 |
175-324-1 |
Cup (9.0"), Steel 175-296-2, and Sleeve, 106-127-2 |
4 |
175-316-1 |
Cup (4.5"), Fits Quick Take Up Wing Nut, GSP 76-371-3 |
1 |
175-217-1 |
Cup 4.5"), Fits Haweka Pro Grip, GSP9700 Cast Iron 76-348-3 |
10 |
175-159-1 |
Cup (4.5") - Fits DSP Cast Wing Nut 76-255 |
|
106-127-2 |
Protector Sleeve (9.50"), Scratch Guard |
1 |
106-82-2 |
Protector Sleeve (4.50"), Scratch Guard |
1 |
97-456-2 |
Shaft, Quick-Take Up, 2-Start, DSP (Rev. 3 - Extra Long Shaft) |
6 |
97-402-2 |
Shaft, 3mm Fine Pitch, Early DSP |
|
97-302-2 |
Shaft, Stub (center-less wheels) (DSP8500/9000/9500) |
1 |
76-390-1 |
Wing Nut, Quick Take Up, Aluminum, Includes Thrust Bearing 130-173-2
(Fits DSP Shaft 97-456-2) |
|
76-371-3 |
Wing Nut, Quick Take Up, Aluminum, w/ Handles, (Fits GSP and 97-456-2) |
3 |
76-255 |
Wing Nut, Fits Shaft 97-456-2, DSP 2 Start Thread |
3 |
|
.gif){kind=logo}